|
|
National Stock Number: 5310-00-437-8693
Federal Supply Class: 5310
National Item Identification Number: 004378693
Description: WASHER,FLAT
Detail: A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
99-1013781 | 99995 | NATO STOCK NUMBER ASSIGNED BY ANOTHER NATION | SP122G | K7766 | BRITISH STANDARDS INSTITUTION |
|
Techincal Specification:
MATERIAL | STEEL OVERALL | MATERIAL DOCUMENT AND CLASSIFICATION | S510,BSI MFR REF SINGLE MATERIAL RESPONSE OVERALL | SURFACE TREATMENT | CADMIUM OVERALL | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | D-T-D 904 05901 MFR REF SINGLE TREATMENT RESPONSE OVERALL | CENTER HOLE SHAPE STYLE | ROUND | HOLE DIAMETER | 0.328 INCHES MINIMUM AND | | 0.333 INCHES MAXIMUM | PERIPHERAL SHAPE STYLE | ROUND | OVERALL DIAMETER | 0.575 INCHES MINIMUM AND | | 0.585 INCHES MAXIMUM | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | THICKNESS | 0.048 INCHES NOMINAL | THE MANUFACTURERS DATA | | MANUFACTURERS CODE | K7766 | DESIGN CONTROL REFERENCE | SP122G |
|
|