|
|
|
National Stock Number:
5310-00-433-5510
Federal Supply Class:
5310
National Item Identification Number:
004335510
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2949-61 | 62983 | EATON AEROSPACE, LLC | | 2949-61 | 90166 | EATON AEROSPACE, LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1045 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 3.255 INCHES MINIMUM AND | | 3.257 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 5.240 INCHES MINIMUM AND | | 5.250 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.359 INCHES MINIMUM AND | | 0.391 INCHES MAXIMUM | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND | | 55.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES ALL SURFACES | | SPECIAL FEATURES | CHAMFER BOTH OD EDGES 0.031 X 45 DEG | | HEAT TREATMENT | QUENCHED AND | | TEMPERED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 90166 | | DESIGN CONTROL REFERENCE | 2949-61 |
|
|