|
|
|
National Stock Number:
5310-00-433-0738
Federal Supply Class:
5310
National Item Identification Number:
004330738
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 50697 | 98927 | ELECTRONIC SPECIALTY CORP RELAY DIV | | 50697 | C7407 | IV-ELECTRONIC KLAUS VESPERMANN KG | | GW502AP2A | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | J2049-1D | 76005 | LORD CORPORATION | | J2049-1D | 78286 | SIKORSKY AIRCRAFT CORPORATION | | 5310PL1939905 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | JH13174 | 31435 | LUCAS AEROSPACE POWER EQUIPMENT CORPORATION | | JH13174 | 3CPE0 | SAFRAN POWER USA LLC |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-355,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.182 INCHES MINIMUM AND | | 0.193 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.880 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.032 INCHES NOMINAL |
|
|