|
|
|
National Stock Number:
5310-00-432-3495
Federal Supply Class:
5310
National Item Identification Number:
004323495
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 2578694-001A | 55284 | HONEYWELL INTERNATIONAL INC. | | 2578694-001B | 06848 | HONEYWELL INTERNATIONAL INC | | 2578694-001B | 17576 | GOODRICH CORP DBA GOODRICH CORP | | 2578694-001B | 55284 | HONEYWELL INTERNATIONAL INC. | | 2578694-001B | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OR | | STEEL COMP 321 OR | | STEEL COMP 347 OR | | STEEL COMP 348 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND | | MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND | | MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND | | MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CP-0520 FSCM 06848 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 1.445 INCHES MINIMUM AND | | 1.455 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 1.995 INCHES MINIMUM AND | | 2.020 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.080 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|