|
|
|
National Stock Number:
5310-00-432-3486
Federal Supply Class:
5310
National Item Identification Number:
004323486
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 2578837-001A | 06848 | HONEYWELL INTERNATIONAL INC | | 52578837-001A | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | 52578837-001A | 06848 | HONEYWELL INTERNATIONAL INC | | 52578837-001A | 95048 | SHEFFIELD MEASUREMENT DIV WARNER AND SWASEY CO SUB OF CROSS AND TRECKER CORP |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11,TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE OR | | QQ-A-250/12,TEMPER T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 3.031 INCHES MINIMUM AND | | 3.036 INCHES MAXIMUM | | OUTSIDE DIAMETER | 3.625 INCHES NOMINAL | | RECESS DIAMETER | 3.111 INCHES MINIMUM AND | | 3.126 INCHES MAXIMUM | | RECESS DEPTH | 0.040 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.115 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | TOP RECESS DIAMETER | 3.111 INCHES MINIMUM AND | | 3.126 INCHES MAXIMUM | | BOTTOM RECESS DIAMETER | 3.111 INCHES MINIMUM AND | | 3.126 INCHES MAXIMUM | | BOTTOM RECESS ANGLE | 90.000 DEGREES NOMINAL | | TOP RECESS ANGLE | 90.000 DEGREES NOMINAL | | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|