|
|
|
National Stock Number:
5310-00-425-9037
Federal Supply Class:
5310
National Item Identification Number:
004259037
Description:
NUT,SLEEVE
Detail:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
|
Manufacturer Information:
| 4043190 | 11449 | TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP | | 4043190 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNJF | | NOMINAL THREAD SIZE | 0.437 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3B | | THREAD DIRECTION | RIGHT-HAND | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | NUT STYLE | SLEEVE | | NUT DIAMETER | 0.640 INCHES MINIMUM AND | | 0.660 INCHES MAXIMUM | | NUT LENGTH | 0.750 INCHES NOMINAL | | BOSS DIAMETER | 0.510 INCHES MINIMUM AND | | 0.514 INCHES MAXIMUM | | BOSS THICKNESS | 0.236 INCHES MINIMUM AND | | 0.246 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE | ROUND W/WRENCH FLATS NUT | | SPECIAL FEATURES | SHPE IS LIKE "D", ONE SIDE OF SLEEVE IS CUT FLAT, FLANGE ON ONE SIDE OF SLEEVE WIDTH IS .100 TO .110 |
|
|