|
|
|
National Stock Number:
5310-00-424-9692
Federal Supply Class:
5310
National Item Identification Number:
004249692
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 10121383 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 14-901049 | 59782 | COMMUNICATIONS & POWER INDUSTRIES LLC | | 900599-3 | 05257 | GENERAL DYNAMICS LAND SYSTEMS - CANADA CORPORATION | | 900599-3 | 70318 | ALLMETAL SCREW PRODUCTS CORP | | 895009-103 | 89305 | SIMMONDS PRECISION PRODUCTS INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.088 INCHES MINIMUM AND | | 0.093 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.156 INCHES MINIMUM AND | | 0.165 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.016 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM |
|
|