|
|
|
National Stock Number:
5310-00-128-2128
Federal Supply Class:
5310
National Item Identification Number:
001282128
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 1226585-4 | 19315 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | | 1226585-4 | 55972 | HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | | 355-122-1512 | 1K426 | MOOG INC. | | 328-747-32 | 90073 | CMC ELECTRONICS INC | | 1226585-4 | 96774 | HONEYWELL INTERNATIONAL INC. | | 355-122-1512 | 99932 | MOOG INC. | | FF-W-92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MVS317-2 | 99251 | MISSION SYSTEMS DAVENPORT INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,TEMPER 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 102-104-0001,FSCM 77045 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.158 INCHES MINIMUM AND | | 0.162 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.240 INCHES MINIMUM AND | | 0.244 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.009 INCHES MINIMUM AND | | 0.011 INCHES MAXIMUM | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81348 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-W-92 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 1K426 | | DESIGN CONTROL REFERENCE | 355-122-1512 |
|
|