|
|
|
National Stock Number:
5310-00-127-7454
Federal Supply Class:
5310
National Item Identification Number:
001277454
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 11612802 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5310001277454 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5310001277454 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | F-AS FABRICATED | | HOLE DIAMETER | 1.281 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | | | MATERIAL | | | MINIMUM TENSILE STRENGTH | 40000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 24000 POUNDS PER SQUARE INCH | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 2.992 INCHES MINIMUM AND 2.997 INCHES MAXIMUM | | THICKNESS | 0.260 INCHES NOMINAL |
|