|
|
|
National Stock Number:
5310-00-119-4644
Federal Supply Class:
5310
National Item Identification Number:
001194644
Description:
WASHER,RECESSED
Detail:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
|
Manufacturer Information:
| 5L7888 | 11083 | CATERPILLAR INC | | 5L7888-00 | 58312 | MIL-TECH MFG INC |
|
Techincal Specification:
| 0.156 INCHES MAXIMUM | | TOP RECESS DIAMETER | 2.591 INCHES MINIMUM AND | | 2.597 INCHES MAXIMUM | | BOTTOM RECESS DIAMETER | 2.591 INCHES MINIMUM AND | | 2.597 INCHES MAXIMUM | | BOTTOM RECESS ANGLE | 89.0 DEGREES MINIMUM AND | | 91.0 DEGREES MAXIMUM | | TOP RECESS ANGLE | 89.0 DEGREES MINIMUM AND | | 91.0 DEGREES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 11083 | | DESIGN CONTROL REFERENCE | 5L7888 | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | IE357,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | RECESSED BOTH SIDES | | HOLE DIAMETER | 2.531 INCHES MINIMUM AND | | 2.537 INCHES MAXIMUM | | OUTSIDE DIAMETER | 3.231 INCHES MINIMUM AND | | 3.237 INCHES MAXIMUM | | RECESS DEPTH | 0.020 INCHES MINIMUM AND | | 0.040 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.153 INCHES MINIMUM AND |
|
|