|
|
|
National Stock Number:
5310-00-116-6078
Federal Supply Class:
5310
National Item Identification Number:
001166078
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 782244 | 31441 | AMERICAN SAFETY FLIGHT SYSTEMS INC | | 782244 | 62323 | CONAX FLORIDA CORPORATION | | CYRD316 | 05624 | GE AVIATION SYSTEMS LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OR | | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.240 INCHES MINIMUM AND | | 0.245 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.407 INCHES MINIMUM AND | | 0.413 INCHES MAXIMUM | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.028 INCHES MINIMUM AND | | 0.034 INCHES MAXIMUM | | HEAT TREATMENT | ANNEALED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 62323 | | DESIGN CONTROL REFERENCE | 782244 |
|
|