|
|
|
National Stock Number:
5310-00-112-2228
Federal Supply Class:
5310
National Item Identification Number:
001122228
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 3205-050 | 66503 | WOODWARD, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI410 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SP-151,FSCM66503 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.312 INCHES MINIMUM AND | | 0.322 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.500 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.030 INCHES MINIMUM AND | | 0.036 INCHES MAXIMUM | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND | | 45.0 ROCKWELL C MAXIMUM | | HEAT TREATMENT | AS FABRICATED | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 66503 | | DESIGN CONTROL REFERENCE | 3205-050 |
|
|