|
|
|
National Stock Number:
5310-00-111-5610
Federal Supply Class:
5310
National Item Identification Number:
001115610
Description:
NUT,PLAIN,ROUND
Detail:
A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. See also NUT (1), PLAIN, KNURLED. (When height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
|
Manufacturer Information:
| 56742 | 93835 | PARKER HANNIFIN CORPORATION |
|
Techincal Specification:
| THREAD SERIES | UNEF | | NOMINAL THREAD SIZE | 0.812 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3B | | THREAD DIRECTION | LEFT-HAND | | MATERIAL | STEEL COMP 4140 OVERALL | | HARDNESS RATING | 20.0 ROCKWELL C MINIMUM AND | | 28.0 ROCKWELL C MAXIMUM | | NUT STYLE | ROUND | | SMALL END DIAMETER | 0.885 INCHES MINIMUM AND | | 0.890 INCHES MAXIMUM | | DRIVE POINT DEPTH | 0.047 INCHES NOMINAL | | NUT DIAMETER | 0.998 INCHES MINIMUM AND | | 1.000 INCHES MAXIMUM | | NUT THICKNESS | 0.185 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | DRIVE POINT WIDTH | 0.094 INCHES NOMINAL | | UNDERCUT THICKNESS | 0.094 INCHES NOMINAL | | DRIVE POINT QUANTITY | 4 | | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL BOTH ENDS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 93835 | | DESIGN CONTROL REFERENCE | 56742 |
|
|