|
|
|
National Stock Number:
5310-00-021-8322
Federal Supply Class:
5310
National Item Identification Number:
000218322
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 218322 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 218322 | 24617 | GENERAL MOTORS CORP | | 46833 | 78945 | PROVERBS 31 INVESTMENTS LLC DIV GATEWAY STRATEGIC SOURCING DBA GATEWAY STRATEGIC SOURCING | | MILW1085TYPEA | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | AN960-4 | 95764 | AIR ASSOCIATES INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1010 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633,COMP FS1010-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR | | ZINC OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.125 INCHES NOMINAL | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.312 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.032 INCHES NOMINAL | | NONDEFINITIVE SPEC/STD DATA | A TYPE | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY SURFACE FINISH AND HOLE DIA | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILW1085TYPEA | | MANUFACTURERS CODE | 21450 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 218322 |
|
|