|
|
|
National Stock Number:
5307-00-550-4002
Federal Supply Class:
5307
National Item Identification Number:
005504002
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 48-431-621-5 | 80070 | LOCKHEED MARTIN CORPORATION | | 48-431-621-5 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| OVERALL LENGTH | 1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4340 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.726 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.787 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD PITCH DIAMETERS | +0.2312 TO 0.2324 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|