|
|
|
National Stock Number:
5307-00-518-7217
Federal Supply Class:
5307
National Item Identification Number:
005187217
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 5187217 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| HARDNESS RATING | 18.0 ROCKWELL C MINIMUM AND 23.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.500 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-11415,CL A2 OR CL B2 OR CL C2 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.750 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.750 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD CLASS | 2A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.812 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 1.312 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|