|
|
|
National Stock Number:
5307-00-515-9838
Federal Supply Class:
5307
National Item Identification Number:
005159838
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 68956-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.120 INCHES MINIMUM FIRST HOLE | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.770 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.440 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.500 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD PITCH DIAMETERS | +0.1693 TO 0.1713 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|