|
|
|
National Stock Number:
5307-00-478-8174
Federal Supply Class:
5307
National Item Identification Number:
004788174
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| W316A16-003 | 55948 | BOTOMAN MFG CO INC | | W316A16P003 | 55948 | BOTOMAN MFG CO INC |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.094 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.000 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD LENGTH | 0.334 INCHES MINIMUM STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.490 INCHES NOMINAL NUT THREAD | | THREAD PITCH DIAMETERS | +0.1683 TO 0.1696 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
|
|