|
|
|
National Stock Number:
5307-00-478-1508
Federal Supply Class:
5307
National Item Identification Number:
004781508
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 175040 | 17772 | AERO ENGINEERING & MANUFACTURING COMPANY OF CALIFORNIA, LLC | | 175040 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.130 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 6.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050,COND F4 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8630 | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD | | SPECIAL FEATURES | STUD END DRILLED FOR COTTER PIN,0.130 IN. DISTANCE FROM COTTER PIN HOLE CEN TERLINE TO STUD END,0.070 IN. COTTER PIN HOLE DIAMETER | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.380 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.380 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD QUANTITY PER INCH | 32 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|