|
|
|
National Stock Number:
5307-00-473-3971
Federal Supply Class:
5307
National Item Identification Number:
004733971
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 150-424GPC25 | 27235 | HARDIE-TYNES CO., INC. | | 150-424KPC25 | 27235 | HARDIE-TYNES CO., INC. | | MILB857 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY NUT END THREAD LENGTH AND MODIFIED BY STUD END THREAD LENGTH | | OVERALL LENGTH | 7.625 INCHES NOMINAL | | MATERIAL | STEEL COMP 1541 | | NOMINAL THREAD SIZE | 0.750 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.750 INCHES STUD THREAD | | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND A STYLE | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 5A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.875 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 1.125 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 10 NUT THREAD | | THREAD QUANTITY PER INCH | 10 STUD THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|
|