|
|
|
National Stock Number:
5307-00-446-8861
Federal Supply Class:
5307
National Item Identification Number:
004468861
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 205-040-308-011 | 97499 | BELL TEXTRON INC | | 205-040-308-11 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| OVERALL LENGTH | 2.570 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8740 | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SPECIAL FEATURES | NUT END TAPPED 1/4-28 UNF-1B,0.320 IN. MIN DEEP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.820 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 0.938 INCHES NOMINAL STUD THREAD | | THREAD PITCH DIAMETERS | +0.3512 TO 0.3527 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|