|
|
|
National Stock Number:
5307-00-442-9954
Federal Supply Class:
5307
National Item Identification Number:
004429954
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 68957 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 2.000 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 10 STUD THREAD | | THREAD PITCH DIAMETERS | 0.1673 TO 0.1693 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.440 INCHES MINIMUM NUT THREAD | | 0.500 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 26.0 ROCKWELL C NOMINAL | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.120 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.040 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM FIRST HOLE |
|
|