|
|
|
National Stock Number:
5307-00-442-0844
Federal Supply Class:
5307
National Item Identification Number:
004420844
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 212-040-472-5 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8740 OR | | STEEL COMP 8735 | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 2.395 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | 0.375 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 16 STUD THREAD | | THREAD PITCH DIAMETERS | 0.3422 TO 0.3437 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.688 INCHES MINIMUM NUT THREAD | | 0.938 INCHES MINIMUM STUD THREAD | | SPECIAL FEATURES | 0.342 TO 0.352 IN. DIA UNTHREADED PORTION | | SURFACE FINISH | 32.0 MICROINCHES NUT THD | | 32.0 MICROINCHES STUD THD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 212-040-472-5 |
|
|