|
|
|
National Stock Number:
5307-00-439-7835
Federal Supply Class:
5307
National Item Identification Number:
004397835
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 720-001-002 | 26055 | PARKER-HANNIFIN CORPORATION | | 720-001-002 | 59211 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 1.100 INCHES MINIMUM AND | | 1.130 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.112 INCHES NUT THREAD | | 0.112 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 40 NUT THREAD | | 40 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.520 INCHES NOMINAL NUT THREAD | | 0.310 INCHES NOMINAL STUD THREAD | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 26055 | | DESIGN CONTROL REFERENCE | 720-001-002 |
|