|
|
|
National Stock Number:
5307-00-434-8331
Federal Supply Class:
5307
National Item Identification Number:
004348331
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 47-620-234-4 | 04614 | TEXTRON SYSTEMS CORPORATION | | 47-620-234-4 | 80070 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP E4340 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND C MIL SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.703 INCHES MINIMUM AND | | 1.733 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | 0.312 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2872 TO 0.2885 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.718 INCHES MAXIMUM NUT THREAD | | 0.921 INCHES MAXIMUM STUD THREAD | | SPECIAL FEATURES | STUD END THREAD 0.009 IN. OVERSIZE |
|
|