|
|
|
National Stock Number:
5307-00-434-8325
Federal Supply Class:
5307
National Item Identification Number:
004348325
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 47-620-232-3 | 80070 | LOCKHEED MARTIN CORPORATION | | 47-620-232-3 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP E4340 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | CADMIUM OVERALL | | OVERALL LENGTH | 1.329 INCHES MINIMUM AND | | 1.359 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | NOMINAL THREAD SIZE | 0.562 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD PITCH DIAMETERS | 0.2842 TO 0.2855 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.500 INCHES MAXIMUM NUT THREAD | | 0.696 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 27.0 ROCKWELL C NOMINAL | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.110 INCHES MINIMUM FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.075 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 97499 | | DESIGN CONTROL REFERENCE | 47-620-232-3 |
|
|