|
|
|
National Stock Number:
5307-00-429-0156
Federal Supply Class:
5307
National Item Identification Number:
004290156
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 12689A | 1ML14 | BRINKLEY TECHNOLOGY GROUP LLC | | 12689A | 28265 | HERCULES ENGINE CO INC |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1112 ASSN STD SINGLE MATERIAL RESPONSE | | SURFACE TREATMENT | PHOSPHATE OVERALL | | OVERALL LENGTH | 2.312 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | 0.625 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | 11 STUD THREAD | | THREAD PITCH DIAMETERS | 0.5690 TO 0.5710 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.000 INCHES MINIMUM NUT THREAD | | 0.938 INCHES MINIMUM STUD THREAD | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.188 INCHES MINIMUM FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.156 INCHES MINIMUM FIRST HOLE |
|
|