|
|
|
National Stock Number:
5307-00-426-8129
Federal Supply Class:
5307
National Item Identification Number:
004268129
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 201954 | 06853 | BENDIX COMMERCIAL VEHICLE SYSTEMS LLC | | 20T4982 | 81336 | CHIEF OF ENGINEERS DEPT OF ARMY |
|
Techincal Specification:
| HARDNESS RATING | 121.0 ROCKWELL C NOMINAL | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD | | OVERALL LENGTH | 2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1213 | | THREAD PITCH DIAMETERS | +0.5680 TO 0.5700 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 11 STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD LENGTH | 0.859 INCHES MINIMUM NUT THREAD AND 0.891 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.995 INCHES MINIMUM STUD THREAD AND 1.005 INCHES MAXIMUM STUD THREAD |
|
|