|
|
|
National Stock Number:
5307-00-120-8806
Federal Supply Class:
5307
National Item Identification Number:
001208806
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 177720-3 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8630 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 4.380 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | THREAD CLASS | 2A NUT THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD LENGTH | 1.000 INCHES NOMINAL NUT THREAD | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | 177720-3 |
|
|