|
|
|
National Stock Number:
5307-00-111-7818
Federal Supply Class:
5307
National Item Identification Number:
001117818
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 698893-2 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| MATERIAL | STEEL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 2.280 INCHES MINIMUM AND | | 2.300 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.112 INCHES NUT THREAD | | 0.112 INCHES STUD THREAD | | THREAD CLASS | 2A NUT THREAD | | 2A STUD THREAD | | THREAD QUANTITY PER INCH | 40 NUT THREAD | | 40 STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.020 INCHES MINIMUM AND | | 1.040 INCHES MAXIMUM NUT THREAD | | 0.440 INCHES MINIMUM AND | | 0.460 INCHES MAXIMUM STUD THREAD | | SPECIAL FEATURES | W/HEX. SOCKET DRIVE IN STUD END | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND | | 47.0 ROCKWELL C MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 99193 | | DESIGN CONTROL REFERENCE | 698893-2 |
|