|
|
|
National Stock Number:
5307-00-026-8479
Federal Supply Class:
5307
National Item Identification Number:
000268479
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| W316A12P006 | 55948 | BOTOMAN MFG CO INC |
|
Techincal Specification:
| MATERIAL | STEEL | | OVERALL LENGTH | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNC STUD THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | 0.190 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | 24 STUD THREAD | | THREAD PITCH DIAMETERS | 0.1713 TO 0.1726 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.334 INCHES MINIMUM NUT THREAD | | 0.334 INCHES MINIMUM STUD THREAD | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.084 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.085 INCHES MINIMUM AND | | 0.115 INCHES MAXIMUM FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 55948 | | DESIGN CONTROL REFERENCE | W316A12P006 |
|
|