|
|
|
National Stock Number:
5306-00-574-0312
Federal Supply Class:
5306
National Item Identification Number:
005740312
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| AN174-51A | 81352 | AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP |
|
Techincal Specification:
| FASTENER LENGTH | 5.140 INCHES MINIMUM AND 5.187 INCHES MAXIMUM | | GRIP DIAMETER | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM | | GRIP LENGTH | 4.672 INCHES MINIMUM AND 4.704 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.436 INCHES MINIMUM AND 0.515 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNF |
|
|