|
|
|
National Stock Number:
5306-00-541-9340
Federal Supply Class:
5306
National Item Identification Number:
005419340
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 69680V9-35 | 56878 | SPS TECHNOLOGIES, LLC | | 69680V9-35 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.928 INCHES MINIMUM AND 0.938 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.123 INCHES MINIMUM AND 0.143 INCHES MAXIMUM | | FASTENER LENGTH | 3.032 INCHES MINIMUM AND 3.062 INCHES MAXIMUM | | GRIP DIAMETER | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM | | GRIP LENGTH | 2.178 INCHES MINIMUM AND 2.198 INCHES MAXIMUM | | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.434 INCHES MINIMUM AND 0.454 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 260000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.562 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | WIDTH BETWEEN FLATS | 0.616 INCHES MINIMUM AND 0.627 INCHES MAXIMUM | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.834 INCHES MINIMUM AND 0.884 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNJF |
|
|