| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| FASTENER LENGTH | 0.415 INCHES MINIMUM AND 0.425 INCHES MAXIMUM |
| FIRST DIAMETER FROM HEAD | 0.480 INCHES MAXIMUM |
| FOURTH DIAMETER FROM HEAD | 0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| HEAD DIAMETER | 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| HOLE CONFIGURATION STYLE | HEXAGON LONGITUDINAL HOLE |
| HOLE DIAMETER | 0.109 INCHES NOMINAL |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | 5-317,5-876,FSCM 71321 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| SPECIAL FEATURES | 0.5000 HARDENED TO 35/40 ROCKWELL C SCALE,THREAD HARDENED TO 20/25 ROCKWELL C SCALE |
| SECOND DIAMETER FROM HEAD | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| WIDTH ACROSS FLATS | 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | H-S5,FSCM 24692 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| TEST DATA DOCUMENT | 24692-CA304 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD DIRECTION | RIGHT-HAND |
| THIRD DIAMETER FROM HEAD | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| THREAD CLASS | 3A |