| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.732 INCHES MINIMUM AND 2.772 INCHES MAXIMUM FIRST HOLE |
| FASTENER LENGTH | 3.012 INCHES MINIMUM AND 3.032 INCHES MAXIMUM |
| HARDNESS RATING | 53.0 ROCKWELL C MINIMUM AND 56.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.500 INCHES MINIMUM AND 0.515 INCHES MAXIMUM |
| HEAD STYLE | HEXAGON |
| HOLE CONFIGURATION STYLE | HEXAGON FLATS |
| HOLE DIAMETER | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| HOLE QUANTITY | 1 |
| HOLE TYPE | DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP H11 OVERALL |
| MINIMUM TENSILE STRENGTH | 270000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.750 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE |
| SHOULDER DIAMETER | 0.9985 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM FIRST SHOULDER |
| SHOULDER SHAPE | ROUND FIRST SHOULDER |
| SHOULDER LENGTH | 2.005 INCHES MINIMUM AND 2.025 INCHES MAXIMUM FIRST SHOULDER |
| SPECIAL FEATURES | FURNISHED WITH POINT 0.068 LONG,0.650 MIN. TO 0.660 MAX DIA. |
| WIDTH BETWEEN FLATS | 1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 TY2 CL2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.997 INCHES MINIMUM AND 1.017 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 16 |
| THREAD SERIES DESIGNATOR | UNJF |