6130-00-500-3080 RECTIFIER ASSEMBLY,METALLIC Index 6130-00-500-3082 RECTIFIER,METALLIC

National Stock Number:
5306-00-500-3081

Federal Supply Class:
5306

National Item Identification Number:
005003081

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
NAS12974D1680205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.265 INCHES MINIMUM AND 1.325 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH1.453 INCHES MINIMUM AND 1.493 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.309 INCHES MINIMUM AND 0.312 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH1.010 INCHES MINIMUM AND 1.030 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SPECIFICATION/STANDARD DATA80205-NAS1297 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS0.490 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.352 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
THREAD QUANTITY PER INCH28
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us