|
|
|
National Stock Number:
5306-00-484-3327
Federal Supply Class:
5306
National Item Identification Number:
004843327
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 73992-5D17 | 50392 | SPS TECHNOLOGIES INC | | 73992-5D17 | 56878 | SPS TECHNOLOGIES, LLC | | A1C220-5D17 | 06725 | SPS TECHNOLOGIES, LLC | | AIC220-5D17 | 06725 | SPS TECHNOLOGIES, LLC | | BM17028-5-17 | 17446 | HUCK INTERNATIONAL, INC | | AIC220-5D17 | 76301 | THE BOEING COMPANY | | ST3M561-5D17 | 06752 | BRYS INSTRUMENT CORP | | ST3M561-5D17 | 1V757 | WESCO AIRCRAFT HARDWARE CORP. | | MB13-5D17 | 73197 | HI-SHEAR CORPORATION | | ST3M561-5D17 | 76301 | THE BOEING COMPANY | | BM17028-5-17 | 97928 | HUCK INTL INC | | MB13-5D17 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH | | MB13-5D17 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | MB13-5D17 | R1120 | SATAIR A/S |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.274 INCHES MINIMUM AND 1.331 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 1.398 INCHES MINIMUM AND 1.445 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM | | HEAD HEIGHT | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | 23-105 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE | | SPECIFICATION/STANDARD DATA | 76301-ST3-561 MANUFACTURERS STANDARD | | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MAC PS13145 FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD LENGTH | 0.326 INCHES MINIMUM AND 0.393 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|