|
|
|
National Stock Number:
5305-00-543-2023
Federal Supply Class:
5305
National Item Identification Number:
005432023
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 10125367 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 5305005432023 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | CIPRD-MS35265-25 | 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA | | MB11383-18-18 | 19422 | DEMARKUS CORP REFRIGERATION ENGINEERING CORP | | MS35265-25 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SC19-3CA | 01843 | AMBAC INTERNATIONAL CORPORATION | | SC19-3CA | 04998 | ADAMS AIRCRAFT INTERNATIONAL INC |
|
Techincal Specification:
| FASTENER LENGTH | 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | HEAD DIAMETER | 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM | | HEAD HEIGHT | 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM | | HEAD STYLE | FILLISTER | | HEAD HOLE CONFIGURATION STYLE | ROUND | | HOLE DIAMETER | 0.046 INCHES NOMINAL | | HOLE QUANTITY | 1 | | INTERNAL DRIVE STYLE | SLOT | | MINIMUM TENSILE STRENGTH | 55000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | SCREW MATERIAL | STEEL | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.126 INCHES MINIMUM AND 0.188 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNC |
|
|