5305-00-514-7831, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-514-7831

Federal Supply Class:
5305

National Item Identification Number:
005147831

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

CA2656-4-14

29372

HOWMET GLOBAL FASTENING SYSTEMS INC.

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.198 INCHES MINIMUM AND 1.234 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
FASTENER LENGTH	1.293 INCHES MINIMUM AND 1.313 INCHES MAXIMUM
GRIP DIAMETER	0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH	0.875 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
HEAD DIAMETER	0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURES	PLUNGER OPERATED SPRING LOADED RETAINING BALLS
SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE FINISH	63.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial