5305-00-508-2802, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-508-2802

Federal Supply Class:
5305

National Item Identification Number:
005082802

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS334C14-5

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	1.577 INCHES MINIMUM AND 1.624 INCHES MAXIMUM
GRIP DIAMETER	0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH	1.114 INCHES MINIMUM AND 1.134 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER	0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	HEXAGON
MATERIAL	STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	90.250 INCHES
SINGLE SHEAR STRENGTH	4650 POUNDS PER SQUARE INCH
SPECIFICATION/STANDARD DATA	80205-NAS 334 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH ACROSS FLATS	0.157 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD CLASS	3A
THREAD LENGTH	0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial