5305-00-494-2439, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-00-494-2439

Federal Supply Class:
5305

National Item Identification Number:
004942439

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

457-5527	A486G	NIMIKKEISTOKESKUS NCB FINLAND
NAS1155V21D	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.543 INCHES MINIMUM AND 1.593 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	1.672 INCHES MINIMUM AND 1.702 INCHES MAXIMUM
GRIP DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH	1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HEAD DIAMETER	0.577 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK
INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATION	NAS 621,COMPOSITION 6AL 4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	TITANIUM ALLOY OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial