5305-00-486-2362 SCREW,CLOSE TOLERANCE Index 5330-00-486-2365 RUBBER ROUND SECTION

National Stock Number:
5305-00-486-2363

Federal Supply Class:
5305

National Item Identification Number:
004862363

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.


Manufacturer Information:
NAS1154V42D80205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.800 INCHES MINIMUM AND 2.850 INCHES MAXIMUM FIRST HOLE
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
FASTENER LENGTH2.926 INCHES MINIMUM AND 2.956 INCHES MAXIMUM
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM
HEAD DIAMETER0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLEOFFSET CRUCIFORM (TORQUE SET)
MATERIAL DOCUMENT AND CLASSIFICATIONNAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALTITANIUM ALLOY UNS R54520 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
THREAD CLASS3A
THREAD LENGTH0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH28
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us