|
|
|
National Stock Number:
5305-00-486-2320
Federal Supply Class:
5305
National Item Identification Number:
004862320
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| AIC82-5-6 | 06725 | SPS TECHNOLOGIES, LLC | | C082-5-6 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | SFT22-5A6 | 56878 | SPS TECHNOLOGIES, LLC | | SFT22-5A6 | 80539 | SPS TECHNOLOGIES, LLC | | C082-5-6 | 81755 | LOCKHEED MARTIN CORPORATION | | VS2545T5F6 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.710 INCHES MINIMUM AND 0.757 INCHES MAXIMUM | | GRIP DIAMETER | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM | | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD DIAMETER | 0.635 INCHES NOMINAL | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD LENGTH | 0.325 INCHES MINIMUM AND 0.393 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|