| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.130 INCHES NOMINAL FIRST HOLE |
| FASTENER LENGTH | 1.235 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| HEAD HEIGHT | 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HOLE DIAMETER | 0.047 INCHES NOMINAL |
| HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL | STEEL OVERALL |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 130000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE |
| WIDTH ACROSS FLATS | 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.875 INCHES MINIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNF |