5305-00-470-3221, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-470-3221

Federal Supply Class:
5305

National Item Identification Number:
004703221

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

003-008413

26916

NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.090 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
HEAD HEIGHT	0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD DIAMETER	0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD STYLE	PAN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL	STEEL CORROSION RESISTING OR STEEL OVERALL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.138 INCHES
SPECIAL FEATURES	CONE POINT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.328 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial