5305-00-469-3411, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-00-469-3411

Federal Supply Class:
5305

National Item Identification Number:
004693411

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

365477-5

00752

L3HARRIS TECHNOLOGIES, INC.

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.563 INCHES MINIMUM AND 0.573 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.750 INCHES NOMINAL
FIRST DIAMETER FROM HEAD	0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
HEAD DIAMETER	0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT	0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
HEAD STYLE	PAN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.164 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.177 INCHES MINIMUM AND 0.187 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial