|
|
|
National Stock Number:
5305-00-460-4589
Federal Supply Class:
5305
National Item Identification Number:
004604589
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| FFS92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | LK21093-0619 | 26304 | TORKON FASTENER CORP | | MS21093-0619 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS21093-0619 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY LOCKING FEATURE | | FASTENER LENGTH | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | HEAD DIAMETER | 0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 | | LOCKING FEATURE | STRIP | | MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 3C STYLE | | SCREW MATERIAL | STEEL | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.159 INCHES MINIMUM AND 0.261 INCHES MAXIMUM | | THREAD CLASS | 2A | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|