|
|
National Stock Number: 5305-00-455-2601
Federal Supply Class: 5305
National Item Identification Number: 004552601
Description: SCREW,CLOSE TOLERANCE
Detail: A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
7S35-4A12 | 43999 | THE BOEING COMPANY |
|
Techincal Specification:
COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | FASTENER LENGTH | 1.051 INCHES MINIMUM AND 1.081 INCHES MAXIMUM | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | GRIP LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | HEAD DIAMETER | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM | HEAD STYLE | FLAT COUNTERSUNK | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | MATERIAL | STEEL COMP 4130 OVERALL | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | NOMINAL THREAD DIAMETER | 0.250 INCHES | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | THREAD DIRECTION | RIGHT-HAND | THREAD CLASS | 3A | THREAD LENGTH | 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM | THREAD SERIES DESIGNATOR | UNF | THREAD QUANTITY PER INCH | 28 |
|
|