|
|
|
National Stock Number:
5305-00-455-2476
Federal Supply Class:
5305
National Item Identification Number:
004552476
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 1897-9-355-1 | 99872 | ENTRON INDUSTRIES LIMITED PARTNERSHIP DBA ENTRON INDUSTRIES PROPERTY DIV | | FFS92 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | SCC91355-1 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | MS35276-233 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FASTENER LENGTH | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM | | HEAD DIAMETER | 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM | | HEAD HEIGHT | 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM | | HEAD HOLE CONFIGURATION STYLE | ROUND | | HEAD STYLE | FILLISTER | | HOLE DIAMETER | 0.046 INCHES NOMINAL | | HOLE QUANTITY | 1 | | INTERNAL DRIVE STYLE | SLOT | | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 5S STYLE | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE | | SCREW MATERIAL | STEEL CORROSION RESISTING OR STEEL | | SCREW SURFACE TREATMENT | PASSIVATE | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 0.794 INCHES MINIMUM AND 0.875 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 40 |
|
|