|
|
|
National Stock Number:
5305-00-455-0442
Federal Supply Class:
5305
National Item Identification Number:
004550442
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 11729491-3 | 19200 | US ARMY ARDEC RDECOM | | 4207-M07-F09 | 04729 | UNICORP. | | 6173SS0632 | 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV | | 6173SS0632-7 | 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV | | 6173-SS-0632 | 1YGB8 | CAREY MANUFACTURING CO, INC | | 6173SS0632 | 1YGB8 | CAREY MANUFACTURING CO, INC | | 6173SS0632-7 | 1YGB8 | CAREY MANUFACTURING CO, INC | | GS553P06C11 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.376 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 0.688 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | HEAD DIAMETER | 0.312 INCHES NOMINAL | | HEAD HEIGHT | 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | HEAD STYLE | KNURLED NO. 2 | | INTERNAL DRIVE STYLE | SLOT | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | SPECIAL FEATURES | POINT STYLE 6 0.095 IN. DIA,0.125 IN. LG BY 60 DEG OF ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.187 INCHES MINIMUM | | THREAD CLASS | 2A | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 32 |
|
|